Unitech MS335 Manual de usuario Pagina 28

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 41
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 27
24
Scanner Configuration Manager
Bar Code Symbologies, continued
Code 11
Maximum Length defines the maximum length the user will
accept for a valid bar code. Default is “48”.
Minimum Length defines the minimum length the user will
accept for a valid bar code. Default is “1”.
Send Check Digit toggles whether or not to send a check digit.
Default is “No Send”.
Check Digit Number defines the check digit correct result to be
either “1” or “2”. Default is “2”.
Code ID is a user-definable identification letter for Code 11,
which is referred to in the “Use Code ID” function (see page 9).
Default is letter “J”.
Enabled toggles the ability for the keyboard/scanner to read
Code 11 on or off. Default is “No”.
Delta Code
Send Check Digit toggles whether or not to send a check digit.
Default is “Send”.
Calculate Check Digit toggles whether or not to calculate a
check digit. Default is “Yes”.
Code ID is a user-definable identification letter for Delta Code,
which is referred to in the “Use Code ID” function (see page 9).
Default is letter “D”.
Enabled toggles the ability for the keyboard/scanner to read
Delta Code on or off. Default is “No”.
Supplement Code (for UPC-E, ISBN, EAN-13)
Insert Space Separator toggles whether or not to output a space
between the main and supplemental bar codes. Default is “No”.
Must Present toggles whether or not the supplemental bar code
must be present in order to output data. Default is “Yes”.
Five Supplement Code toggles whether the five digit supple-
mental bar code is to be recognized. Default is “No”.
Two Supplement Code toggles whether the two digit supple-
mental bar code is to be recognized. Default is “No”.
Vista de pagina 27
1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 40 41

Comentarios a estos manuales

Sin comentarios