Unitech PA600 Manual de usuario descargar pdf (Pagina 6)

Laser Information

The Unitech PA600 II series is certified in the U.S. to conform to the

requirements of DHHS/CDRH 21CFR Subchapter J and to the requirements of

IEC 825-1. Class II and Class 2 products are not considered to be hazardous.

The PA600 II series contains internally a Visible Laser Diode (VLD) whose

emissions do not exceed the maximum limits as set forth in the above

regulations. The scanner is designed so that there is no human access to

harmful laser light during normal operation, user maintenance or during

prescribed service operations.

The laser safety warning label required by the DHHS/IEC for the PA600 II

series' optional laser scanner module is located on the memory compartment

cover, on the back of the unit.

CAUTION! Use of controls or adjustments or performance of procedures other

than those specified herein may result in hazardous laser light.

Use of optical instruments with the scanner will increase eye

hazard. Optical instruments include binoculars, microscopes, and

magnifying glasses. This does not include eye glasses worn by

the user.

Battery Notices

The PA600 II is equipped with a Lithium-Ion battery pack and backup battery.

Both batteries will discharge after an extended period of not being used.

When both batteries are discharged, recharge the unit for 16 hours in order to

fully charge the main battery and backup battery. Recharge the PA600 II

through the following:

1. Plug the USB charging cable to the PA600 II and plug the 5V/2A AC-DC

adapter to the power jack of the USB charging cable.

2. Place the PA600 II into the docking station and plug the 5V/2A AC-DC

adapter to the power jack of the docking station.

1 2 3 4 5 6 7 8 9 10 11 ... 54 55

Sin comentarios

Unitech PA600 Manual de usuario Pagina 6